Skip to content

How to Fix a Broken Car Window

How to Fix a Broken Car Window

Driving with a broken window is dangerous to your health in lots of ways. Smoke from different vehicles can easily get inside the automobile and cause breathing problems. During the night, the driver inhales very cold air. Plus, car thieves can easily steal DVD players and stereos.

If you need to fix a broken car window right now, follow these simple steps below by Trusted Loan Lenders!

Learn more: Self Employed Car Loans With Easy Approval

1. How to temporarily cover a broken window

If you suspect theft or vandalism, take close-up pictures of the damaged window. Present these images to law enforcement and your insurance company. Owning a dashboard camera may help detectives to catch at fault in less time.
Listed here are the tools you need to get the job done.

1. Get a pair of protective gloves

You may want to grab items of loose glass while doing repairs. Broken glass also offers sharp edges that may cause nasty cuts to your hands when cleaning the surface. Whenever a thief breaks into a car, shattered glass falls on to car seats. You will need to scoop large pieces out and any that are scattered on the mats.

2. A stiff handheld brush

Glass breaks unevenly. Despite scooping out large fragments, some smaller ones could easily get stuck on the automobile seat. Fortunately, it is possible to get rid of them with a stiff handheld brush. Put it to use on the automobile seat with glass fragments for about a minute. Sweep the automobile mats as well.

Alternatively, you should use a shop vacuum from an automobile shop for this purpose.

3. Two cotton towels

Cleaning the window gets rid of dust and oil smears. Adhesive tape cannot stick on a dirty window. For this task, you may need two cotton towels and some water. Dampen one towel and utilize it to gently wipe the window you wish to fix.
Have a five-minute break then dry your window utilizing the dry cloth.

4. Bubble wrap

What is bubble wrap? It is just a special sort of plastic specifically designed for broken windows. It’s strips of adhesive to help you seal an opening in your car or truck window within just 30 seconds. Bubble wrap is transparent allowing sunlight entry. People like it because it’s waterproof and an entire roll can last you for all repairs.

Rubble wrap is really easy to use because you just have to unroll an item that’s large enough to cover a hole. It remains firmly in place even though driving at 60 miles per hour. You’ll find a roll of bubble wrap at your nearest auto shop or Wal-Mart.

5. Avoid slamming the door

A damaged window might involve some cracks that are hard to see but develop rapidly as a result of impact. After using rubble wrap, close and open the doorway gently. Slamming it’s dangerous because a traveler seated right close to the glass will get cuts.
If it’s one of many rear car doors, you might consider telling your household or friends to utilize the other door.

2. How to insert a replacement car window

With so many solutions in the current market, you can select a new or used window. You may wonder who’d want to buy a used car window. This market provides prestigious car owners who aren’t willing to cover a large number of dollars to get their windows fixed.

A new car window is the better option because it meets an automobile manufacturer’s standards of high quality. It may be a bit costly but it’s quite clean.

What tools do you want for this job?

  1. A flathead screwdriver
  2. Screwdriver set
  3. Replacement window
  4. Thick plastic bag for glass fragments
  5. A friend to help you support the replacement in place

Step-by-step instructions

1. Wear protective gloves

You will need protective gloves to prevent any cuts which may occur during removing the damaged window. It’s advisable to own a pair of leather padded work gloves because they’re tough and long-lasting. They also improve your grip whenever using screwdrivers.

2. Dismantle the window electronic switch

First, switch off the automobile to prevent the window from moving around. Use a damp cotton cloth to wash the buttons and panel. Since each car has it’s own interior design, you’ll need a set of screwdrivers to unscrew the window switch.
Carry a tiny Ziploc bag where you’ll keep consitently the screws while dismantling your switch. You might need your screwdriver to pry the cover open. It shouldn’t take significantly more than three minutes since the screws can be visible. Unplug the whole socket from the connecting wires because it hinders you from removing the doorway panel.

2. Pry the door panels using the flathead screwdriver

In order to eliminate the damaged window, you need to unscrew the doorway panels. Beneath these tough plastic coverings are screws holding the automobile door intact. You’ll spot panels nearby the hinges and lower elements of car doors. Use your flathead screwdriver gently to prevent breaking the protective covering.

3. Unscrew the door panel

This is where your screwdriver set comes in. You will need different screwdrivers because a car door panel has various screws holding it intact. After unscrewing, use your screwdriver to pry parts of the doorway panel. Keep your screws in a secure place and avoid mixing them up.

4. Remove the insulation lining

Beneath the doorway panel is just a sheet of insulation lining. It prevents air from getting between the doorway panel and damaging levers controlling locks and windows. You may notice items of glass about it however you can clean it by providing it a great shake. Fold it and store it safely because you’ll stick it back after putting the brand new window.

5. Unscrew the window bracket

The window bracket is just a metallic frame that supports a vehicle window. Additionally, it has the levers that enable a crankshaft or power switch for opening and closing. You’ll find two screws at the base of the car door. One nearby the speaker, while another is near to the lock. Ask your friend to carry the broken window as you unscrew it from the bracket to prevent it from falling.

6. Mount the new window carefully inside the bracket

Your friend will hold the doorway firmly while you mount the replacement car window. First, ensure that you’re holding it in the right position. Slip it gently within the slots while ensuring that it goes inside uniformly. After ensuring that’s it’s in position, slowly roll-up the window. If you made it happen correctly, it will open and close like a new one.

3. How to fix a power window that won’t go up

1. Find out the cause

If you lent the automobile to someone you then realize that the ability windows aren’t working, discover the precise cause. It helps you to determine whether you are able to do a DIY repair or take it to a mechanic. Rub the window switch together with your fingers to get if you will find sticky traces of sugary beverages.

Some drinks don’t leave sticky traces but you can detect their smell by sniffing your window switch. Take milk for example. You may also look under the car seats to see if you will find bottles, juice boxes, or soda cans. Ensure you check your cup holder on the dashboard to see if you will find any traces of spilled beverages.

Power windows can fail if there is attempted breaking and entering. Check the doorframe to see if someone was employing a straightened metal hanger to choose your dock lock. You will also notice several scratches near the doorway handle since the thief was pulling his hanger repeatedly. If you own a dashboard camera, you’ll see the thief and notify the police.

2. Inspect the fuses

You’ll find the ability window fuse box under or near your steering wheel. It’s small, black, and has diagrams printed on the cover.

Get your flathead screwdriver to pry it open. You’ll see several fuses arranged vertically. Since blowing up is the most obvious reason, grab each plug gently for closer inspection. Use a flashlight to test for burn marks and damaged metal strips.

Do you have a test light or multimeter? First, switch on the engine and click the window open. You’ll need a friend to carry the button while you use your test light or multimeter to test whether electricity is flowing.

3. Unscrew the window switch

You will need your friend to carry the doorway firmly while you unscrew the window switch from the armrest. Come ready with a screwdriver because you’ll have to pry it. After removing the cover, take out the socket gently and inspect the wires. If they’re broken, you may need an automobile mechanic to set up a brand new one.

Use a screwdriver to see if the buttons are wobbling. You can fix this by adjusting them to the right positions. Ensure you check whether there’s a circulation of household current by switching on the engine and employing a test light on each component.

4. Check the window’s motor assembly

In order to access the window’s motor assembly, you’ll have to get rid of the inner door panel under the insulation lining. First, unscrew your speakers. You’ll need a 10-millimeter socket to unscrew the bolts holding your inner door panel in position.

The motor assembly will fall off after removing a few bolts. In case a thief was employing a metal hanger to achieve entry, he could have snapped your window cable while trying to jam your door lock. The good thing is that you can get a brand new motor assembly quite easily and replace it at home.

4. How to replace a broken bus window

If you’ve just woken up to a smashed bus window, here are some tips to assist you replace it. You will need the following tools.

  • A pair of protective gloves
  • Small stiff brush
  • Empty trash bag
  • Rivethead removal tool
  • Electric drill
  • Replacement window
  • Screwdriver
  • A pal

1. Get rid of broken glass

Utilize the small stiff brush to sweep any broken glass on the seats, floors, and window frame. Scrub the seats in order to catch tiny fragments lodged between fabrics. Sweep them in to a small heap because you may need to dump them as part of your empty trash bag.

When you begin this job, wear your protective gloves. Your gloves protect you in two ways. Your fingers avoid rubbing against any shattered glass lying on the floor. In the event that you run into loose pieces of broken glass, you’ll pull them out confidently. Why? As the tough glove protects your fingers from cuts.

2. Remove the window frame

You will find rivet head removal tools at auto mechanic shops. They’re small hollow cylinders that join with rivet heads allow you to unscrew them. For this job, you may need an electrical drill. It helps you to remove all window frame rivets in less than a minute.

Loosening the rivets brings about instability. You will need a friend to put up the window frame set up while unscrewing the rivets. Apply moderate pressure on your drill to prevent damaging your rivets. Once you’ve removed the final rivet, defeat the frame and work with a screwdriver to remove lodged pieces of broken glass.

3. Clean the window frame

You will need a cloth and some soapy water to remove accumulated dust. Doing this ensures smooth movement during opening and shutting. It also gets rids of small glass fragments that you didn’t spot while sweeping. Wait until your frame is totally dry in order to install the replacement window.

4. Insert new window

You’ll work with a screwdriver to create space involving the rubber space that holds the window intact. Keep consitently the window frame upright when inserting the brand new window to suit the corners securely. Keep consitently the window in a open position in order to test if it fits correctly by pushing it down.

5. Reassemble the window

Return the window frame to its original position and secure it with the rivets. Attach the rivet head removal tool to your power drill to achieve this task. Test the window several times before leaving.

5. Avoid doing these five costly mistakes after replacing a broken car window

1. Staying with a temporary fix for too long

Perhaps you’re really happy that the roll of bubble wrap you bought is doing a good job in preventing cold air, rain, and smoke from getting as part of your car. Many people get so confident with the temporary window fix that they keep postponing visits to an auto mechanics search for permanent replacements.

The additional time you spend driving around with a damaged window, the more damage you cause to the remainder. Bumpy roads could cause pieces of glass to fall on your passengers due to continuous vibrations that take devote the window frame.

Learn more: Short Term or Long Term Loan When Investing in a Car

2. Using the wrong tools

What goes on if you use a home knife in place of an excellent screwdriver to disassemble your window switch? The knife widens the spaces and makes it hard for a screwdriver to suit on the screws heads. In addition, one must push the knife on the screw head to keep a solid grip and this destroys the threads.
Employing a blunt item to pry plastic casings surrounding the window socket could cause cracks.

3. Hitting the rough roads immediately after getting a replacement

Auto mechanics work with a special adhesive to help keep a replacement window constantly in place for 72 hours. For the adhesive to work, you’ll need to prevent bumpy roads because rattling prevents the glue from sticking effectively.
Going on an off-road drive is dangerous since the window can break while cruising at high speeds. Plus, the dust particles that settle on the doorway and window frame also affect the special adhesive.

Learn More: Nine Bad Driving Habits That Will Ruin Your Car

4. Washing the car just after getting your car window fixed

Mechanics recommend keeping the replacement car window dry for at least 72 hours after installation. This period is sufficient for the special adhesive on the window frame to dry up. So, irrespective of just how many oily fingerprints you spot on your brand-new window, steer clear of the urge to achieve for a material and some soapy water.

Learn More: Are You Planning a Road Trip?

5. Playing loud music

Playing bass heavy music is a pricey mistake since the continuous sound vibration that’s taking devote your car or truck compromises a newly replaced window. Just like driving on a rough road, the sound vibration prevents the adhesive from sticking effectively.

Learn More: Is Your Credit Score Affecting Insurance Rates?

6. Follow these tips today!

Repairing your car or truck window can allow you to weather a negative storm as it prevents rain from covering that person while driving. Doing this prevents you from causing accidents and you are able to drive comfortably to the nearest mechanic.
If you plan on doing DIY repairs, be sure you have all the best tools to prevent breaking sockets and electrical components. If you own a luxury car, then buying a used car window will allow you to minimize repair expenses. You’ll receive more tips by speaking with other motorists who have experience in doing car window repairs from their house garages.

Learn more: Just how to Fix a Flat Tire (Even If You’re a Newbie)